Skip to main content
C-Water

Solution

Water Quality You Can Rely On.

Drinking water systems are judged by their worst day. C-Water builds potable treatment around the source, the storage, the distribution and the point at which quality is actually verified.

Discuss Your Water Quality RequirementsRequest a Quote

01Why It Matters

Potable Water

In most buildings the treatment plant is not where potable quality is lost — the storage tank and the distribution network are. Residence time, temperature, stagnant branches and inadequate disinfectant residual do more damage than the incoming supply.

02Common Problems

What Goes Wrong.

  • Turbidity and particulates

    Particles shield organisms from disinfection and affect both appearance and taste.

  • Inconsistent disinfectant residual

    Residual decays with time and temperature. A correct dose at the plant is not a correct residual at the far end of the network.

  • Storage and stagnation

    Oversized tanks and low-demand branches increase residence time and give growth an opportunity.

  • Taste, odour and hardness

    Acceptability matters. Water that meets a standard but is not drunk has not solved the problem.

03Operational Risks

What It Costs the Operation.

Public health exposure

The consequence of failure in a potable system is categorically different from a utility system.

Regulatory and audit findings

Records and continuous evidence are usually required, not just periodic test certificates.

Guest and occupant confidence

In hospitality and healthcare, water quality is visible to the customer.

04The C-Water Approach

How We Work the Problem.

  1. 01

    Verify the source

    Full analysis of the incoming supply across its normal range, including microbiological indicators.

  2. 02

    Establish barriers

    Filtration and disinfection sized so that no single failure removes all protection.

  3. 03

    Control the residual

    Dosing controlled against a measured residual, verified at the far point of the network rather than at the plant.

  4. 04

    Manage storage

    Turnover, temperature and tank condition reviewed alongside the treatment itself.

  5. 05

    Record continuously

    Logged online measurement provides the evidence trail that periodic sampling cannot.

05Technology Stack

The System, Stage by Stage.

Each stage changes what the next one has to deal with. This is the sequence C-Water engineers around.

  1. 01

    Supply

    Verified

  2. 02

    Filtration

    Turbidity barrier

    TIMEX
  3. 03

    Disinfection

    Primary barrier

  4. 04

    Residual Control

    Measured feed

    Walchem
  5. 05

    Storage

    Turnover managed

  6. 06

    Distribution

    Verified at far point

Technology Stack

View all
01TIMEX

Filtration

Removing what should not be there, at the degree the downstream equipment actually requires.

02Walchem

Sensors & Measurement

The parameters that reveal what a water system is doing, and what it takes to measure them reliably.

03Walchem

Monitoring & Control

Measure what matters, control what drifts, and keep a record of what actually happened.

04

Water Analysis

Knowing what is actually in the water, before deciding what to do about it.

05

Reverse Osmosis & Membrane Treatment

Membrane systems that hold their performance because the pretreatment, chemistry and monitoring around them were designed together.

Related Products

View all
TIMEXCartridge Filters

TIMEX Cartridge Filters

The final barrier before something that cannot tolerate particles.

View Product
WalchemSensors

Walchem Disinfection Sensors

Measuring the disinfectant that is actually present, not the dose that was set.

View Product
WalchemControllers

Walchem Intuition-6

Analytical controller for single-system cooling and general water-treatment duty.

View Product
TIMEXTreatment Systems

TIMEX Water Treatment Systems

Engineered treatment packages built around a defined duty.

View Product

Related Services

View all
01

Analyse

Water Analysis

Sampling, analysis and interpretation against the system the water is actually in.

02

Assess

System Assessment

A structured survey of condition, control quality, risk and improvement opportunity.

03

Maintain

Preventive Maintenance

Scheduled attention to the components whose quiet failure undermines everything else.

04

Monitor

Monitoring & Reporting

Continuous measurement turned into periodic reporting that says what changed and what to do.

Related Industries

View all

Hospitality

Cooling, hot water, domestic supply and pool systems kept reliable in a building that never closes.

Healthcare

Clinical, utility and domestic water systems in buildings that cannot be taken out of service.

Commercial Buildings

HVAC, domestic water and heating systems in offices, malls and mixed-use developments.

Government & Municipal

Potable supply, wastewater and public facility water systems with long service lives and public accountability.

Food & Beverage

Process, utility and hygiene water treated to standards the product and the auditor both accept.

Related Knowledge

View all
water chemistry6 min read

Why Water Analysis Should Come Before Chemical Treatment

Analysis is the cheapest step in a treatment programme and the one that determines whether the rest of it was correctly chosen.

filtration6 min read

How Filtration Protects Downstream Equipment

Solids cost you three times over: they foul heat transfer, they shelter microbiology, and they consume treatment chemical that should have been protecting metal.

Let’s Talk About Your System.

Tell us the operating conditions and what you are seeing. We will confirm the water chemistry before recommending anything.

Discuss Your Water Quality RequirementsRequest a Quote